1. Components Required:
1 x C-Beam Tension XL Linear Actuator https://openbuildspartstore.com/c-beam-tension-xl-linear-actuator-bundle/
2 x Xtension Limit Switch Kits https://openbuildspartstore.com/xtension-limit-switch-kit/
1 x Motor Mount Plate - NEMA 17 https://openbuildspartstore.com/motor-mount-plate-nema-17-stepper-motor/
1 x NEMA 17 Stepper Motor https://openbuildspartstore.com/nema-17-stepper-motor/
2 x 80mm Inside Outside Corner Brackets https://openbuildspartstore.com/inside-outside-corner-bracket/
2x 250mm 20x40mm V-Slot Linear Rail https://openbuildspartstore.com/v-slot-20x40-linear-rail/
1 x Rubber Feet Set (4 Pack) https://openbuildspartstore.com/rubber-feet-set-4-pack/
Use the C-Beam Tension XL Linear Actuator (or any of our other actuators) as the basis for a Camera Slider to shoot some amazing motion video. Add a couple 250mm 20x40mm V-Slot Extrusions to form a set of solid feet.
We added a couple Rubber Feet underneath to keep it from sliding around, and dampemn vibrations. A convenient carry handle helps you move the rig from shoot to shoot.
A set of 3D printed parts provides rotation and tilt control.
3. Wiring